Category: Ritual Objects | Tradition: Vajrayana Buddhism | Origin: Nepal, India, and Tibet
A kartika looks like one piece, but it is almost always made of two kinds of metal worked in two different ways: a hard blade, and a decorated handle that ends in a half-vajra. This guide explains what a kartika is made of, why each part uses the material it does, how gilding, silver and stones are added, and where wood and bone fit in. For the meaning and symbolism of the knife itself, see our article on what a kartika is.
The Materials of a Kartika at a Glance
Most kartikas follow the same plan. The blade is iron or steel, and the handle and fittings are cast in a copper alloy such as bronze or brass. The table below shows the usual arrangement. The exact materials vary with the age, the size and the workshop, so the specifications on each listing are always the final word.
|
Part |
Usual material |
Notes |
|
Blade |
Iron or steel |
Forged into a crescent with a hooked tip |
|
Handle |
Bronze, brass or copper |
Cast, usually with a half-vajra at the top |
|
Makara, dragon and other details |
Bronze, brass or copper |
Cast as part of the handle or the clasp |
|
Decoration |
Silver, gold, sometimes stones |
Inlay, gilding or settings, where present |
|
Stand or sheath |
Wood, leather and others |
An accessory, and not part of the knife itself |
The Blade: Iron and Steel
The blade is the part that gives the kartika its name and its meaning, and it is traditionally made of iron. Iron can be forged: heated, hammered into the crescent shape and given its hooked tip. Some blades are made of steel, which is iron with a controlled amount of carbon and keeps its shape and edge better. Museum examples show the same choice. A bronze-handled kartika of the sixteenth or seventeenth century offered by the auction house Zacke, for instance, has an iron blade bordered with flames and a dragon incised on each side.
Not every kartika has a blade of iron or steel. Some, particularly small or decorative pieces, are made in brass, copper, bronze or white metal, with the same crescent shape. These are made as ritual objects, and as symbols, ornaments and gifts. A blade of an unusual material is not a flaw. It is simply a different kind of kartika, and the listing should say what it is made of.
The Handle and Fittings: Bronze, Brass and Copper
The handle is a different job. It has to carry the vajra, the lotus petals, the beaded rings and, on many kartikas, the open mouth of a makara from which the blade appears to rise. These are fine, rounded forms, and they are made by casting, so the metal must be one that casts well. Copper alloys do this. Bronze (copper and tin) and brass (copper and zinc) both flow well into a mold and take detail, and both can be gilded.
The difference between bronze and brass shows in color and feel. Bronze is deeper and browner, and brass is brighter and more yellow. Pure copper is redder. Some handles are left in the natural color of the alloy and polished, while others are gilded to give them the look of gold.
White Metal and Silver
White metal is a general name for pale, silvery alloys. It is used for pieces that are meant to have a bright, silvery look without the cost of silver. Silver itself appears in two ways. It can be used for the whole of a piece, which is rarer and more costly, or in small amounts as decoration, as inlay in the blade or in fine details on the handle. Silver inlay is made by cutting a groove in the metal, pressing the softer silver into it and then polishing the surface flat. Because silver tarnishes, it needs a little more care than the other metals.
Gilding: The Golden Surface
Many kartika handles and fittings are gilded. A thin layer of gold is applied to the surface of the bronze or brass, so that it shines without being made of solid gold. Traditional Himalayan gilding is often done by the fire-gilding method, in which a mixture of gold and mercury is applied to the metal and heated until the gold stays on the surface. Other gilding methods also exist, and the right one depends on the piece and the maker. In our workshop, gilding is the one stage that is usually given to a specialist gilder, because it needs particular skill. Gilding is done after the casting and the chasing, so that the gold covers the finished detail.
Gilded and plated surfaces are not the same thing. Gilding applies a layer of gold in the traditional way. Plating deposits a thin film of metal by an electrical process. Both give a gold or silver look, but they are different, and a good listing says which one has been used.
Stones and Other Decoration
Some elaborate kartikas have stones set in the handle: turquoise, coral and lapis lazuli are the usual choices in Himalayan metalwork, because their colors stand out against gold. The stones are set in small recesses or in rims of metal, and they are put in at a late stage so that they are not damaged by heat or polishing. Stones are not found on every kartika. They are present only where the design calls for them, and the listing will show them.
Wood and Bone
Kartikas are mostly metal objects, and it is worth being clear about where wood and bone fit.
• Wood: : Wood is not a usual material for the blade or the main handle of a traditional metal kartika. It is, however, very common in the things that go with it: carved stands, display bases and protective cases or sheaths. In some simpler or regional pieces, wood may also appear in a handle.
• Bone: : Bone is not a standard material for the blade or the handle of a kartika. It has a place in the wider world of Himalayan tantric implements, where it may be used for symbolic or decorative elements, and carved skull motifs are a common form of ornament. Bone is not assumed for any kartika, and we mention it only where a particular piece uses it.
• Leather and stone: : Leather is used for sheaths and cases. Stone, as well as wood, bone and iron, may be used for a stand.
It helps to separate the kartika from its accessories. A wooden stand or a leather sheath may be sold with a kartika, but it is not part of the knife itself.

Materials and Size
We make kartikas in copper, brass, bronze, white metal, silver, iron and steel, and in sizes from very small pieces, the size of an earring or a key ring, to large ones made for altars, shrines and monasteries. The materials differ with the size and the purpose. The traditional plan, with a forged blade and a cast handle, applies most clearly to larger altar pieces. The listing for each piece gives its materials and finish.
Caring for a Kartika by Material
• Iron and steel: : They can rust in damp air. Keep them dry, and rub the blade with a very thin film of oil if you live in a humid place.
• Bronze, brass and copper: : Wipe with a soft, dry cloth. They darken naturally with time, and the darkening in the recesses shows the detail of the casting.
• Gilded surfaces: : Avoid polishes and harsh chemicals, and do not scrub, because rubbing wears the gold.
• Silver and white metal: : Silver tarnishes. A soft polishing cloth is usually enough. Keep these pieces away from damp and from chemicals.
Our kartikas are not blessed. We do not sell blessed items, because a blessing is given by a qualified teacher, and not by a shop. If you would like a blessing for your kartika, we can arrange one on your behalf, at your request.
Read more: What Is a Kartika? | How Is a Kartika Made?
Frequently Asked Questions
What is a kartika made of?
Usually an iron or steel blade and a handle cast in bronze, brass or copper, often gilded. Silver, gold and sometimes stones are used for decoration.
What metal is the blade of a kartika made of?
Traditionally iron, and sometimes steel. Some small or decorative pieces are made in brass, copper, bronze or white metal.
Why are the blade and the handle made of different metals?
The blade is forged from iron or steel, which is hard and can be shaped by hammering. The handle has fine detail, so it is cast in a copper alloy such as bronze or brass.
Are kartikas made of gold?
No. Gold is applied as a thin layer on the surface, in a process called gilding. A solid gold kartika would be very rare.
Are kartikas made of wood and bone?
Kartikas are mostly metal. Wood is common in stands, cases and sheaths, and may appear in some simple handles. Bone is not a standard material for a kartika.
What is white metal?
A general name for pale, silvery alloys used to give a bright look at a lower cost than silver.
Does a kartika rust?
An iron or steel blade can rust in damp air. Keep it dry and lightly oiled. Bronze, brass and copper do not rust, but they darken with time.
Are your kartikas blessed?
No. We can arrange a blessing at your request, on your behalf.
Explore Our Kartikas
View our Kartikas
