Category: Ritual Objects | Tradition: Vajrayana Buddhism | Origin: Nepal, India, and Tibet
A kartika is made in two halves that are brought together at the end: a forged iron blade, and a cast handle with a half-vajra on top. Between the design and the finished piece, there is forging, wax modeling, clay molds, casting, chasing, gilding and a careful final assembly. This guide describes each of the steps, starting with the old tradition of the Kathmandu Valley and ending with how we make our own kartikas in Patan. For the meaning of the knife, see our article on what a kartika is, and for the metals, our article on what a kartika is made of.
A Craft with Old Roots in the Kathmandu Valley
The Newar artisans of the Kathmandu Valley have cast and worked metal for many centuries, and Patan (Lalitpur) is one of the best-known centers of the craft. The Rubin Museum describes the lost-wax method of metal casting as a long-standing Himalayan tradition, with the Nepalese stages recorded in detail. Kartikas draw on this tradition for their handles, and on the blacksmith's forge for their blades. A kartika is a good example of the way the two crafts meet in one small object.
Step 1: Design and Planning
The artisan first decides the form: the length of the blade, the size of the handle, and the decoration, which may include a makara at the mouth of the handle, dragons, a vajra, a crossed vajra (vishvavajra), lotus petals and beaded rings. The proportions matter, because the blade, the handle and the half-vajra at the top must look balanced as a single object. For a larger kartika, the design is drawn or modeled before work begins.
Step 2: Forging the Blade
The blade is made first, and separately from the handle. A piece of iron, or sometimes steel, is heated until it glows and is hammered into the crescent shape, with its curved edge and hooked tip. The blade is then filed and ground to its final outline. For good-quality work, this needs a smith with the right forge and tools, which are not the same as those of a metal caster. For this reason, blades are sometimes made by a specialist smith outside the main workshop and brought back for fitting.
Step 3: Modeling the Handle in Wax
The handle is made by lost-wax casting, one of the oldest ways of making metal sculpture. It begins with a model in wax. According to the Rubin Museum's account of Nepalese casting, the wax is made from a mixture of beeswax, vegetable oil and tree resin, and is shaped from sheets and assembled into the form. The artisan models the half-vajra, the lotus petals, the beaded rings and the makara head in wax, with all the fine detail that the finished metal will have.
Step 4: Making the Clay Mold
The wax model is coated with clay, in layers. In the Nepalese method described by the Rubin Museum, the first layer is a fine clay mixed with cow dung, which picks up the detail of the wax, and the later layers are coarser and mixed with rice husks, which give the mold its strength. Each layer must dry before the next is added, so this is the longest part of the casting. An opening is left at the base.
Step 5: Melting Out the Wax and Casting the Metal
The mold is heated, and the wax melts and runs out, leaving a hollow in the shape of the model. This is the "lost wax". The mold is then baked until it is hard. Molten metal, which for a handle is bronze, brass or copper, is poured into the hollow. When it has cooled, the clay is broken away, and the handle appears in metal. Each mold is used only once, so every cast handle is a single piece of work.
Step 6: Cleaning, Chasing and Engraving
A freshly cast handle is rough. The artisan removes the channels through which the metal was poured, files down the casting marks, and repairs any small flaws. The detail is then sharpened with chisels and fine tools, which is known as chasing, and patterns can be engraved on the handle and on the blade. This is where the face of the makara, its teeth and the petals of the lotus are brought to a crisp finish. The surface is then polished.
Step 7: Inlay and Stone Setting
Where the design calls for it, fine lines of silver or gold are inlaid into grooves cut in the blade or the handle, and polished flush with the surface. Some pieces also have stones, such as turquoise or coral, set in small recesses or metal rims. Stones are placed late in the process, so that heat and polishing do not harm them. Not every kartika has inlay or stones. Many are left plain, and the listing shows which.
Step 8: Gilding
If the handle is to be gilded, it goes to the gilder. A layer of gold is applied to the cleaned metal, traditionally by the fire-gilding method, and gives the golden surface that is so closely linked to Himalayan sacred art. We hand this stage to specialist gilders, because it needs particular skill. Gilding is done after the casting and chasing, so that the gold covers the finished detail.
Step 9: Assembly
The blade and the handle, made separately, are now joined. The blade is fitted into the mount of the handle, which in many kartikas is the open mouth of a makara, and secured. Depending on the piece, it may be held mechanically or fixed with solder. Old kartikas sometimes show traces of solder. A kartika with a bronze handle offered by the Zacke auction house, for example, has traces of soldering on one prong of the handle. The artisan checks that the blade sits straight, that the handle is firm, and that the two halves look like a single object.
Step 10: Final Finishing
The last step is finishing and inspection. The blade is polished and its edge is finished. The handle and fittings are cleaned and buffed, particularly around the stones and the fine detail, and the contrast between the gilded, inlaid and plain surfaces is brought out. Each piece is checked before it is packed.

The Time and Skill Involved
The time it takes depends on the size and the design. As a rough guide, a simple kartika with a plain blade and little decoration takes about three to seven working days, and a richly decorated one, with detailed casting, engraving, inlay and gilding, can take two to six weeks or more. The waiting time for the clay to dry, and for the specialist stages, adds to the total. The craft calls for many skills: forging, wax modeling, mold-making, casting, chasing, inlay, setting and gilding. In a family workshop, one master and a few artisans often do several of these, which is why a single kartika carries so many hands in its making.
How We Make Our Kartikas
Our kartikas are made by our artisans in Patan. In our workshop, most of the stages, including the wax modeling, mold-making, casting, chasing, inlay, stone setting and assembly, are done in house. The two exceptions are gilding, which is given to a specialist gilder, and, in some cases, the forging of the blade, which may be made by a specialist smith. Complex engraving is sometimes given to a specialist as well. This means that some kartikas pass through the hands of more than one group of artisans, even though most of the work is done in one workshop.
We make kartikas in a wide range of sizes, from very small ones, the size of an earring or a key ring, to large ones for altars, shrines and monasteries. Our kartikas are not blessed. We do not sell blessed items, because a blessing is given by a qualified teacher, and not by a shop. If you would like a blessing for your kartika, we can arrange one on your behalf, at your request.

Read more: What Is a Kartika? | What Is a Kartika Made Of?
Frequently Asked Questions
How is a kartika made?
The iron blade is forged, and the handle is cast by the lost-wax method in bronze, brass or copper. The handle is chased, engraved and often gilded. The two parts are then joined and finished.
Is a kartika forged or cast?
Both. The blade is forged from iron or steel, and the handle and its decoration are cast.
What is lost-wax casting?
A method in which a model is made in wax, coated in clay, and heated so that the wax melts away. Molten metal is poured into the hollow, and the clay is broken away to reveal the metal.
How is the blade joined to the handle?
The blade is fitted into the mount of the handle, often through the mouth of a makara, and secured mechanically or with solder.
How long does it take to make a kartika?
As a rough guide, a simple kartika takes about three to seven working days, and a richly decorated one two to six weeks or more.
Who makes the kartikas?
Our artisans make them in Patan. Most stages are done in our workshop, while gilding goes to a specialist gilder, and the forging of the blade is sometimes done by a specialist smith.
Are kartikas made by hand?
Yes. Every stage, from forging and wax modeling to chasing and gilding, is done by trained artisans.
Are your kartikas blessed?
No. We can arrange a blessing at your request, on your behalf.
