What Is an Incense Burner Made Of? Metals, Ceramic and Finishes

Learn the materials of an incense burner, from copper, brass and bronze to ceramic, gilding, plating and antique finishes.

Category: Ritual Objects  |  Tradition: Buddhist and Himalayan Ritual Practice  |  Origin: Nepal, India, and Tibet


An incense burner spends its life near fire, so what it is made of decides how well it works and how long it lasts. This guide explains the metals, the ceramic and clay, the finishes and the other parts that go into an incense burner, why each one is chosen, and how to care for it. For the meaning, history and types of burner, see our article on what an incense burner is.

The Materials of an Incense Burner at a Glance

Part

Usual material

Notes

The body

Copper, brass, bronze, white metal, mixed metals, ceramic or clay

Metal burners are mostly cast

The finish

Gold, silver, antique and oxidized surfaces, paint

Applied by separate artisans

Decoration

Stones, bone, relief work, painted designs

Present on some pieces

Chains, handles and feet

Metal

Chosen to match the body

 

Metal Burners: Copper, Brass and Bronze

Most Himalayan incense burners are made of metal, and the three most common metals are all based on copper. Copper itself is warm and reddish, and it takes the heat well. Brass is copper mixed with zinc, and it is bright, strong and yellow. Bronze is copper mixed with tin, and it is darker, heavier and takes fine detail when it is cast. All three can be cast, hammered, polished, gilded or plated, which is why they have been used for ritual vessels for so long.

A metal body also has a drawback: it gets hot. This is why metal burners are made with feet, handles, lids or chains, and why a bed of ash or sand is placed inside, so that the heat does not pass straight to the surface beneath.

White Metal and Mixed Metals

White metal is a general name for pale, silvery alloys, and the recipe varies from one maker to another. It gives a bright look at a lower cost than silver, and it is lighter than brass or bronze. Most of our burners are made of bronze, brass and copper, and some are made of mixtures of these metals with others, such as tin. The mix changes the color, the weight and the way the metal takes a finish. We do not claim a fixed recipe for these alloys, so if the exact metals matter to you, ask us about the burner that you have in mind.

Ceramic and Clay Burners

Ceramic and clay are natural materials that take the heat well, and they suit simple stick, cone and dhup burners. Our ceramic burners are made by hand. They are light, they do not get as hot on the outside as a thin metal body, and they have a soft, natural look. Their weakness is that they can crack or chip if they are dropped, or if they are heated and cooled too quickly. Do not place a hot ceramic burner on a cold or wet surface.

Finishes: Gilding, Plating, Antique and Oxidized

The finish is the surface of the burner, and it changes both its look and the way that it should be cared for. We sell burners in these finishes:

• Gilded: : A thin layer of gold is applied to the metal, so that it shines like gold without being solid gold. Gilding is done by a group of artisans who specialize in it.

• Gold and silver plated: : A thin film of gold or silver color is applied to the surface, and this is done by a separate group of artisans.

• Antique style: : Bronze and brass burners finished to look aged, with a darker tone in the recesses that brings out the detail.

• Oxidized: : The surface is darkened in a controlled way, to give a deep, aged look with contrast between the raised and the recessed parts. This is another specialist job.

• Polished: : The metal is rubbed to a bright, smooth shine.

• Painted: : Some burners carry painted designs, done by their own group of artisans.

Gilding and plating are different. Gilding is the traditional way of putting a layer of gold on metal, and plating is a thin deposited film. Both give a gold or silver look, and a good listing says which has been used.

Stones and Decoration

Some burners are decorated with stones, set into the body, the lid or the rim, usually in the places where the design calls for color. Others are decorated with relief work, such as lotus petals, dragons and auspicious symbols, or with painted designs. Stones and decoration are not found on every burner, and each listing shows what a piece carries.

Bone

Bone is used in two ways. A burner or holder can be made wholly or partly of bone, and bone can also decorate a body of metal, wood, bamboo or another material. We use yak and buffalo bone, and sometimes deer antler. In decoration, bone is inlaid, set in as pieces or beads, or carved into panels and fittings. Bone was once often left natural, but today most is polished or buffed to a smooth finish. Care for it as you would any hand-finished object, away from water, damp and strong heat.

Chains, Handles and Feet

The small parts of a burner are as important as the body. A hanging burner needs strong metal chains, a handled burner needs a handle that stays cool enough to hold and is fixed firmly, and a footed burner needs feet that are even, so that it stands steady. These parts are made of metal to match the body. We check them for strength and fit before a burner is sold.

Caring for a Burner by Material

• Brass, bronze and copper: : Let the burner cool, empty the ash, and wipe with a soft, dry cloth. Brass and bronze darken naturally with time. Avoid harsh chemicals and abrasive polish.

• White metal and mixed metals: : Wipe gently with a soft cloth, and keep dry. Avoid scrubbing.

• Gilded and plated surfaces: : Do not scrub or use polish, since rubbing wears the gold or silver. Clean with a soft, dry cloth only.

• Antique and oxidized finishes: : The dark tone is part of the design, so do not try to polish it away.

• Ceramic and clay: : Let them cool fully, and wash with a soft cloth. Handle with care, and avoid sudden changes in temperature.

• Bone: Wipe gently with a soft, dry cloth, and keep away from water, damp and strong heat.

Our incense burners are not blessed. We do not sell blessed items, because a blessing is given by a qualified teacher, and not by a shop. If you would like a blessing for your burner, we can arrange one on your behalf, at your request.

Read more: What Is an Incense Burner?  |  How Is an Incense Burner Made?

Frequently Asked Questions

What is an incense burner made of?

Usually copper, brass, bronze, white metal or a mix of metals, or hand-made ceramic or clay. Metal burners are mostly cast.

What is the difference between brass and bronze?

Brass is copper mixed with zinc, and it is bright and yellow. Bronze is copper mixed with tin, and it is darker and heavier.

What is white metal?

A general name for pale, silvery alloys. The recipe varies by maker, and it gives a bright look at a lower cost than silver.

Are incense burners made of gold or silver?

Some are gilded, or plated with gold or silver color on the surface. They are not made of solid gold or silver.

What is the difference between gilding and plating?

Gilding is the traditional application of a thin layer of gold to metal, and plating is a thin film of gold or silver deposited on the surface. Both give a gold or silver look.

Is a ceramic burner safe for incense?

Yes, if it is made for the purpose. Keep it on a stable surface, and avoid sudden changes in temperature, which can crack it.

Why does a metal burner get hot?

Metal carries heat well. This is why burners are made with feet, handles, lids and chains, and a bed of ash inside.

Are your incense burners blessed?

No. We can arrange a blessing at your request, on your behalf.

Explore Our Incense Burners

View our Incense Burners