How Is a Serkim Made? Traditional Craft and Finishing

Learn how a serkim is made, from shaping and embossing to filigree, plating and finishing, and why every handcrafted set is slightly different.

Category: Ritual Objects  |  Tradition: Tibetan Buddhism, especially Vajrayana  |  Origin: Nepal, India, and Tibet

 

A serkim looks like a simple chalice on a dish, but it takes real skill to make well. The cup and the bowl must fit together so that the cup sits steadily, the joins must be sound so that the vessel can hold liquid, and the decoration must be cut and finished with care. Traditional serkims are shaped, embossed, engraved, plated and finished largely by hand, which gives each set its own character. This guide walks through how a serkim is made, from the first design to the final inspection, explains the main techniques such as hammering, embossing, filigree, plating and stone setting, and shows why handcrafted sets differ from one another. The steps below describe the traditional approach used in Himalayan metalwork. Exact methods vary between workshops and between sets, depending on the material, size and level of decoration.

The Tradition of Himalayan Metalwork

Nepal's Kathmandu Valley has been known for centuries for its metalwork and sacred art. The craft is often passed down within artisan families, and the valley's workshops have long produced statues, ritual vessels, lamps and offering sets for Buddhist and Hindu use. Hammering sheet metal, embossing, engraving, fine wirework and plating are the foundation of this tradition, and a serkim uses all of them in one object. Because the set is a vessel that is handled and washed often, the maker's skill shows both in the beauty of its decoration and in the soundness of its construction.

Step 1: Design and Planning

Making a serkim begins with a plan. The maker decides on the size of the set and the shape of the cup and the bowl, so that the cup stands securely on the bowl and the overflow falls where it should. The material is chosen, usually copper or brass, along with the finishes, such as silver or gold plating, an oxidized surface or stones. The decoration is planned too, including the bands around the cup and the bowl, the auspicious symbols, any filigree and the form of the base. Sacred art follows traditional guidelines for proportion and symbolism, so these details are not left to chance.

Step 2: Shaping the Cup and the Bowl

The upper cup and the lower bowl can be shaped in two main ways, and some sets combine both.

• Hammering from sheet metal: a flat disc of copper or brass is cut out and softened by heating, then beaten over a rounded form until it rises into the shape of a cup or a bowl. The metal hardens as it is worked, so it is heated again from time to time to keep it workable. This takes a steady eye and hand, since uneven blows leave ripples in the surface.

• Casting: some parts, such as stems, bases and decorative rims, may be cast by pouring molten metal into a mold and letting it cool and set. The rough cast piece is then cleaned and refined by hand.

Whichever method is used, each shaped part is checked for an even wall and a smooth inside before the next stage.

Step 3: Making the Stem, the Base and the Rims

A serkim is rarely made as one piece. The stem that lifts the cup, the base that supports the set and the rims that frame the cup and the bowl are usually made separately and shaped to match. The stem is formed so that it rises gracefully from the base, and the foot is made broad and steady. Decorative rims, often with a beaded or patterned edge, are made to fit the top and bottom of the cup and the bowl. Each part is made with the others in mind, so that the whole set looks balanced when it is put together.

Step 4: Joining and Assembly

Once the parts are ready, they are brought together. The cup is joined to its stem and base, and the rims are fitted, usually by soldering, and the seams are cleaned so that they are neat and strong. The maker checks that the joins are sound, so that the cup can hold liquid, and that the cup stands straight and steady on the bowl. Any part that does not fit well is adjusted at this stage, since a good fit matters for both appearance and use.

Step 5: Embossing and Engraving

Much of a serkim's beauty comes from its relief decoration. In embossing, known as repoussé, the artisan works a design from the inside of the thin metal, using hammers and punches to push the pattern outward so that it stands in relief. Auspicious symbols, lotus petals and scrolling motifs are raised this way, and the metal is usually held steady on a bed of pitch or a similar holding compound while it is worked. The surface is then sharpened by hand, using chisels and engraving tools to cut fine lines and add small details, a process often called chasing.

Step 6: Filigree

Some serkims carry filigree, which is decoration made from very fine metal wire. The wire is drawn thin, twisted or beaded, and shaped into delicate curls, borders and patterns. The pieces are then laid on the surface and attached, usually by soldering. Filigree takes great patience, since each tiny curl must be shaped and placed by hand, and it gives the set a lace-like richness that catches the light.

Step 7: Plating, Gilding and Oxidizing

Many sets receive their final color at this stage. Some are plated with silver, and the details are gilded in gold, which gives the set its two-toned glow. Others are oxidized, which means the surface is deliberately darkened so that the engraved and embossed details stand out. Silver or gold may then be added to selected areas for contrast. Each of these finishes needs a clean, smooth surface, since any flaw shows through. The exact methods differ between workshops.

Step 8: Setting the Stones

Stones such as coral, turquoise and lapis lazuli are added to many sets to give them a rich look. For each stone, the artisan prepares a small setting in the metal, often a raised rim or a tiny cup, then fits the stone and secures it by pressing the metal edge around it. The stones are placed to suit the design, around the cup, the bowl or the base. Setting stones is delicate work, because each stone must be held firmly without being cracked or scratched.

Step 9: Polishing and Final Inspection

At the end, the whole set is cleaned, polished and checked. The craftspeople look at the fit of the cup on the bowl, the steadiness of the set, the soundness of the joins, the evenness of the plating, the sharpness of the decoration and the security of the stones, and they correct any flaw they find. Edges are checked so that they are smooth and comfortable to handle. Once a set passes, it is carefully packed and made ready to be sent out. This final look is one reason handmade sets are valued: each one has been checked by people who know the craft.

Why Every Handcrafted Serkim Is Different

Because so much of the work is done by hand, no two serkims are exactly alike. Small differences in the curve of the cup, the depth of the relief, the pattern of the filigree or the tone of the plating are natural, and they are signs of handwork and not flaws. A machine-made set can look perfectly uniform, but a handcrafted serkim carries the character of the maker and the workshop. Many buyers value this individuality, which is why each set is described on its own product page.

How Our Serkims Are Made

Our serkims are handcrafted by skilled artisans using traditional techniques, shaping, embossing, engraving, plating and finishing each set by hand. We work mainly with copper and brass, and some sets are plated in gold or silver and decorated with filigree and stones. Because the work is handmade, finishes and sizes vary, so each product page lists the materials and details of that set.

Frequently Asked Questions

Is a serkim made by hand?

Traditional serkims are shaped, embossed, engraved and finished largely by hand. Some stages may use tools such as a lathe or a mold, but the detailed work and the finishing are done by skilled makers.

How are the cup and the bowl made?

They are usually hammered from discs of copper or brass over rounded forms, or in some cases cast, and then smoothed, joined to their stems and bases and decorated.

What is repoussé?

It is a method of raising a design from the back of a thin metal sheet, using hammers and punches. The design stands out in relief on the front, and it is then refined and sharpened by hand.

What is filigree?

It is decoration made from very fine metal wire, shaped into delicate curls and patterns and attached to the surface, usually by soldering.

How is the plating done?

The surface is cleaned and smoothed, and then a coating of silver or gold is applied. The exact method differs between workshops, and many sets combine a silver body with gold details.

How long does it take to make a serkim?

It depends on the size and the level of decoration. A plain set takes less time than one with deep embossing, filigree, plating and stones, and every stage needs patience.

Explore Our Serkims

View our handcrafted serkims 

Read more: What Is a Serkim?  |  What Is a Serkim Made Of?